Beko WME 8227 W washing machine

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WME 8227 W washing machine

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 29, 2011 at 4:22 pm #61945
    Micky 32
    Participant

    Had a look at one today, couldn’t spend too much time so i might have overlooked something but here’s what happens…

    Set the program it started. Fills up but no motor action. Put to spin the pump starts up but after about 10 seconds it stops.

    Now there is a flower like symbol flashing and it won’t do anything at all… Checked the brushes they are ok, any ideas?

    March 29, 2011 at 11:17 pm #348122
    leavemetogetonwithit
    Participant

    Re: Beko WME 8227 W washing machine

    Have a good look at motor. Probably loose connection / break in wire somewhere. Tacho magnet even. (Don’t know this model, so I’m just going by symptoms.)
    Mike.

    March 30, 2011 at 6:57 am #348123
    Seamy
    Participant

    Re: Beko WME 8227 W washing machine

    Check brushes are making good contact, take them off rub end with very fine emery paper & same for armature. Then give it a go, run it on spin a few times to bed in brushes if motor is o.k.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.