WML540 Heater

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › WML540 Heater

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • April 11, 2011 at 9:05 am #62164
    spimps
    Participant

    Had a machine with o/c heater but no fault codes,customer just noticed it wasn’t getting warm,is this the norm?
    Stank like 10 monkeys 😯
    BG

    April 11, 2011 at 9:40 am #348987
    iadom
    Moderator

    Re: WML540 Heater

    Heater O/C will not give error codes, it will just stick on the wash, they must have been moving it on.

    This is mentioned in the Error Codes thread. 😉

    April 11, 2011 at 10:24 am #348988
    spimps
    Participant

    Re: WML540 Heater

    I had one on the van so didn’t look through codes to be honest.She didn’t mention that she moved it on just that it took over 2 hours for a 30 degree wash.
    Oh well,cheers BG

    April 11, 2011 at 12:43 pm #348989
    DDSDDS
    Participant

    Re: WML540 Heater

    seems a much more common failure on the hotpoints now
    wonder why?
    i did have one that consistently blew heaters turned out the front half of the drum was from a washer dryer but as this was a washer there was a difference in the soap disp hose so the machine would not fill correctly
    i wonder if the heater failure is a result of lower water levels?

    April 11, 2011 at 1:33 pm #348990
    spimps
    Participant

    Re: WML540 Heater

    These machines certainly don’t use much water in a wash,as the drum is turning and creating air pockets in the water there could be a fair amount of the element ecposed at times perhaps,excellent,food for thought DDSDDS !
    BG

    April 11, 2011 at 2:09 pm #348991
    timdowning
    Participant

    Re: WML540 Heater

    They seem to go when the customer does a 90 degree wash. Certainly thats a pattern Im seing.

    (Also on the WF & WT series.)

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.