Amica AWCT10l

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Amica AWCT10l

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 19, 2011 at 10:25 am #62317
    thankevans
    Participant

    Hi been out To amica washing machine under warranty D1 D2 D3 lights showing, Changed motor still all lights showing, Changed PCB still all lights showing.

    Anyone else had this had to lend customer a washing machine.

    any help please

    April 20, 2011 at 9:47 am #349666
    electrofix
    Moderator

    Re: Amica AWCT10l

    only time i had this error code was bad connection to pcb took connectors off put them back all ok

    its got to be a wiring error check all cables to motor fron pcb. check first with plus off and check again with plug on pcb but not on motor
    check you can read tacho from pcb with plugs on and spin motor to see pulses coming up

    hope this helps

    Dave

    April 20, 2011 at 10:42 am #349667
    thankevans
    Participant

    Re: Amica AWCT10l

    Thanks i will give that a try cheers

    April 21, 2011 at 2:33 pm #349668
    thankevans
    Participant

    Re: Amica AWCT10l

    Found a wire on the motor jack broken thanks for the advice got it all running and the bearings have gone.

    April 22, 2011 at 7:00 am #349669
    Applianceman2010
    Participant

    Re: Amica AWCT10l

    Lol classic! 😉

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.