- This topic has 3 replies, 2 voices, and was last updated 14 years, 11 months ago by
.
-
Posts
-
Hiya, I have the above freestanding cooker. Everything works fine except the main oven is not reaching temp. It heats but doesn’t get hot enough. I replaced the main oven stat and tested the elements, cut outs etc and all tested fine. Put it all back together, turned the oven back on and tested it and found no difference. Should I now change the switch which is attached the the main oven stat?
The clock works perfectly too so a bit baffled.Re: Creda CS61EW 17100049 Cooker not hot enough
Can you check that model number as I can’t get that to come up anywhere?
K.
Re: Creda CS61EW 17100049 Cooker not hot enough
Hi,
When you say you checked all the elements, which ones did you check as there are several in that machine? And, which cooking mode are you using as I’m assuming from the elements fitted that it’s a multi-finction oven?
The easy one to miss and, it often is, would be this base element which is mounted at the bottom of the main oven.
There are also two side elements listed but there’s very little use on those at all.
There’s also an odd little board fitted, this one, but I can’t see where it’s fitted or quite what it does. 😕
HTH
K.
- You must be logged in to reply to this topic.