Diplomat 8332 problem

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Diplomat 8332 problem

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • May 2, 2011 at 9:42 am #62535
    llewelynlad
    Participant

    I have a Diplomat 8332. When i run the program at any temp it runs for about 30 seconds and then stops with a constant bleeping. The bleeping stops when the door is opened but to start light flashes continuously. If the machine is run on rinse it just stops with no bleeps.

    There appears to be no water but it drains and the water feed is on.

    Any help would be appreciated.

    May 3, 2011 at 10:01 am #350381
    nigegt
    Participant

    Re: Diplomat 8332 problem

    Check that the start light is flashing cont. and there is no one second gap as this is a fault code so count the flashes and post again or if there is no gap then the ntc is faulty.

    Nige

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.