Siemens WXLM148AGB/19 auto – no start/lights

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Siemens WXLM148AGB/19 auto – no start/lights

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • May 3, 2011 at 1:24 pm #62555
    MickGeorge
    Participant

    Hi folks

    Been to this today and suspect module but would just like a bit of reassurance pls 🙂

    Customer says control been intermitant at selecting program and not coming on but was ok as long as m/c not switched off at dial – now not coming on at all.

    Supply into m/c and up to main board – no indicator lights on at all and nothing when you try and select a program. checked motor and door lock but all seems ok

    Suspect module/selector switch as they been having previous problems with selector but would just like some comfermation I havn’t missed something stupid.

    Thanks – all comments appreciated.

    Mick

    May 3, 2011 at 3:59 pm #350453
    Martin
    Participant

    Re: Siemens WXLM148AGB/19 auto – no start/lights

    MickGeorge wrote:checked motor and door lock but all seems ok

    How can you check the door lock if the machine is dead? 😕

    MickGeorge wrote:Suspect module/selector switch as they been having previous problems with selector

    Hmm?….could be?….what were the “previous problems” anyway?

    May 3, 2011 at 4:40 pm #350454
    MickGeorge
    Participant

    Re: Siemens WXLM148AGB/19 auto – no start/lights

    Hi Martin

    Did a quick check on door lock heater to make sure it wasn’t o/circuit but grasping at straws really as would have expected some lights up somewhere but there are no lights showing.

    Did explain previous probs were intermitant selecter opperation – sometimes it would select, lights came on and worked ok through wash – other times would not come on/ no lights showing, and then once they had fiddled with the selector a bit and got the lights to come up it worked fine. Just sounds like a dodgy selector to me altho it feels ok??

    Thought someone might have had a similar prob with a Bosh or Siemans as they the same more or less and suspect they use the same boards.

    Thanks for the reply

    Mick

    May 4, 2011 at 8:08 am #350455
    Martin
    Participant

    Re: Siemens WXLM148AGB/19 auto – no start/lights

    MickGeorge wrote:other times would not come on/ no lights showing, and then once they had fiddled with the selector a bit and got the lights to come up it worked fine. Just sounds like a dodgy selector to me altho it feels ok??

    Sure sounds like it to me too. Costly blighters though aren’t they? 🙁

    You’ll just have to go with it I guess….fingers crossed! 🙂

    May 5, 2011 at 8:45 am #350456
    MickGeorge
    Participant

    Re: Siemens WXLM148AGB/19 auto – no start/lights

    Thanks for the reply Martin

    Suspect module as power in nothing out – not even lights but I just know these days nothing as straight forward as it seems and just wondered if I had missed anything.

    Would have expected if module/selector ok I would have got a light or lights up somewhere even if door lock or something else faulty – but there again who knows in this day and age of improving technoligy :rolls:

    Thanks again

    Mick

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.