Diplomat (Whirlpool) ADP8332 Dishwasher 11 flashes

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Diplomat (Whirlpool) ADP8332 Dishwasher 11 flashes

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 4, 2011 at 11:35 am #62578
    spanner51
    Participant

    This dishwasher starts OK, pumps out for 20 secs, starts to fill then shows an error FA in the display, bleeps, and the start light flashes 11 times. The whitegoods error code book says it’s the Optical Water Sensor. Can anyone help me as to what to look for? The black grid in the sump is clear. Thanks

    Graham

    May 4, 2011 at 5:20 pm #350534
    maltheviking
    Participant

    Re: Diplomat (Whirlpool) ADP8332 Dishwasher 11 flashes

    Opticle water sensor is fixed to the metering tank, used to be a full tank to repair but Connect are doing just the sensor, their number, 5045174626675 but out of stock £18 ish.
    If I was you mate then I would check the connecting plug to the sensor first maybe give it a little “nip” :eeek: to tighten it up

    May 4, 2011 at 7:03 pm #350535
    spanner51
    Participant

    Re: Diplomat (Whirlpool) ADP8332 Dishwasher 11 flashes

    Thanks for the reply. Since my post I went and replaced the diaphram switch, and it seems to be working (no error code), except now the askoll type wash pump is noisy and knacked. I will go back to fit a new pump, and do what you suggested. Thanks again

    Graham

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.