- This topic has 5 replies, 2 voices, and was last updated 14 years, 11 months ago by
.
-
Posts
-
Hi,
Called out to this machine yesterday. No motor action and rinse light flashing on all cycles. Checked carbons, worn but still about 1/2″ left. Checked pressure chamber, fine. Checked wiring continuity, fine. Tacho seems fine but obviously being Miele no idea of knowing if resistance is right. Machine & motor both megger okay.
There are some slight burn marks on the power board, cleaned it up but still the same fault. Is there anything else that can cause this fault? Miele want the normal arm and a leg for a new one and it’s a lot of money to spend on a hunch.
Cheers.
Chris
Re: Miele W864 rinse light flashing
Thanks for your reply – it starts bout 5 secs after starting any programme.
Re: Miele W864 rinse light flashing
if you search for miele rinse light you get a few hits
domesticbliss wrote about a w937
“Hi and thanks for your input. usually flashing rinse light does point to either/ and direction control relay on module board which also blows the 6.3A fuse on same board, preventing the motor from working.”had a similar thing when a cutomer used machine with transit brackets in blew relay and fuse on board
this may help
Dave
Re: Miele W864 rinse light flashing
Cheers, thanks Dave. Tried using the new search on here but couldn’t get it to find anything. Will let the customer know the bad news, although great knowing what part it is as hopefully might have a chance of sorting a repair.
- You must be logged in to reply to this topic.