wd440 nightmare

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › wd440 nightmare

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • May 12, 2011 at 9:11 am #62754
    robbo1973
    Participant

    Hi all this machine was not starting at all checked normal and then changed module machine lights up door locks but the door light doesn’t come on and machine doesn’t do anything,checked again changed interlock incase found a valve open circuit but still the same.anyone had this before???

    Cheers chris

    May 12, 2011 at 11:03 am #351152
    allan73
    Participant

    Re: wd440 nightmare

    Have you checked brushes and motor plug connections ?

    May 12, 2011 at 12:00 pm #351153
    robbo1973
    Participant

    Re: wd440 nightmare

    Aint took carbs off but meter through and block seems ok tugged all wires

    May 13, 2011 at 7:05 am #351154
    allan73
    Participant

    Re: wd440 nightmare

    Might be worth taking them off,it’s usually something on the motor side with those symptoms.

    May 13, 2011 at 7:33 am #351155
    Martin
    Participant

    Re: wd440 nightmare

    robinsonrobbo wrote:and then changed module

    Did you do the eeprom/smartcard bit or just swap over the eeprom?

    May 13, 2011 at 10:26 am #351156
    robbo1973
    Participant

    Re: wd440 nightmare

    Module was from emw

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.