Hotpoint BFI680 Hose clips

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint BFI680 Hose clips

Viewing 15 posts - 1 through 15 (of 22 total)
1 2
  • Author
    Posts
  • May 16, 2011 at 4:00 pm #62825
    maltheviking
    Participant

    Can anyone help with the part no’s of the hose clips required when changing the wash pump on these Hotpoint Indeshit dishwashers. Need to be narrow jubilee types

    May 16, 2011 at 4:14 pm #351425
    iadom
    Moderator

    Re: Hotpoint BFI680 Hose clips

    The official ones are several pounds each, others have mentioned on the forums that their local Vauxhall dealer stocks this type of clip at a fraction of the price.

    Unfortunately I have drawn a blank at my local Vauxhall dealer. 😥

    One of the clips is a C00211358.

    Jim.

    May 16, 2011 at 4:34 pm #351426
    maltheviking
    Participant

    Re: Hotpoint BFI680 Hose clips

    Yeh I remember the post from a couple of years back, there have been the odd posting recently , I thought someone might have sussed some clips out from other makes. The last pump I did I used Jubilee’s, not the best but got it going, just like to get some smaller ones.

    May 16, 2011 at 9:35 pm #351427
    ray.t
    Participant

    Re: Hotpoint BFI680 Hose clips

    Hi, I had this problem the other week, went to all my local motor factors and none of them had anything like it.
    My local Halfords had a range of thin jubilee clips, worked a treat.

    May 16, 2011 at 9:45 pm #351428
    iadom
    Moderator

    Re: Hotpoint BFI680 Hose clips

    Hmm, last time I looked in Halfords they had no thin jubilee clips, may have another look.

    I don’t suppose you have a part/stock number for them?

    Jim.

    May 17, 2011 at 6:18 am #351429
    ray.t
    Participant

    Re: Hotpoint BFI680 Hose clips

    I do yes,
    18-25mm HFX382 item code 971507
    25-35 and 27-40mm HFX384 item code 971523
    They were on the rack with all the car fuses scotch locks and that sort of stuff.
    I used them for a Kenwood dishwasher so not sure what size you would need for the hotpoint. They are 9mm wide
    Ray

    May 17, 2011 at 7:25 am #351430
    Criscold
    Participant

    Re: Hotpoint BFI680 Hose clips

    Try Merlin Motor Sports – 9mm Wide made by Norma
    http://www.merlinmotorsport.co.uk/AIR-D … index.html

    May 17, 2011 at 7:44 am #351431
    maltheviking
    Participant

    Re: Hotpoint BFI680 Hose clips

    Plenty of suppliers of 9mm wide clips available, this one seems to be quite reasonable in their pricing
    http://www.anyclamp.com/mikalor/single/ … ually.html

    May 17, 2011 at 9:18 am #351432
    iadom
    Moderator

    Re: Hotpoint BFI680 Hose clips

    The one I listed as a Hotpoint part above is a 5mm wide clip.

    1801927/C00211358.

    Surely 9mm ones are bog standard jubilee clips?

    Jim.

    May 17, 2011 at 11:25 am #351433
    Martin
    Participant

    Re: Hotpoint BFI680 Hose clips

    iadom wrote:Surely 9mm ones are bog standard jubilee clips?

    I agree. The size of clip needed should be 5mm. And there’s not too many that do that size unless you look out for stainless ones and then their extendable diameter (OD) is a bit limited.

    May 17, 2011 at 11:42 am #351434
    Criscold
    Participant

    Re: Hotpoint BFI680 Hose clips

    Bog Standard clips are 12mm – I have always used these on the whirlpool DW pumps and sump hose – perfect fit but never had to fit one onto a Hotpoint pump

    May 17, 2011 at 4:34 pm #351435
    maltheviking
    Participant

    Re: Hotpoint BFI680 Hose clips

    Martins right, 5mm width is more suitable, I have the odd 5mm type made by Oetiker, finding a supplier of these is the problem. Oetiker make the crimp on bands which are the factory fitted type, anyone using these?

    May 17, 2011 at 6:05 pm #351436
    iadom
    Moderator

    Re: Hotpoint BFI680 Hose clips

    By far the largest number of jubilee clips I have are 9mm, the only ones that are 12mm are the very big ones for Hotpoint WMA sump hoses and the like.

    The ‘average’, most common jubilee clip is a 9mm one which is a tad to big for the dishwasher hoses. 😥

    The ones supplied by Hotpoint/Indesit are the Oetiker 5mm, 28-39 ones. They should be gold plated at the price they charge for them.

    I have trawled the WWW to try and find someone who would supply these in sensible quantities to no avail. :rolls:

    Jim.

    May 17, 2011 at 6:49 pm #351437
    maltheviking
    Participant

    Re: Hotpoint BFI680 Hose clips

    iadom wrote:
    I have trawled the WWW to try and find someone who would supply these in sensible quantities to no avail. :rolls:

    Jim.So have I Jim, so have I 🙁

    May 17, 2011 at 9:15 pm #351438
    deltra
    Participant

    Re: Hotpoint BFI680 Hose clips

    there is some clips that fit,they are whirlpool ones,i think they might be available in ukw shop. (not cheap tho.)

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 22 total)
1 2
  • You must be logged in to reply to this topic.