- This topic has 2 replies, 2 voices, and was last updated 14 years, 10 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
hi, i put the machine through a test program and when it gets to the fault indication part it flashes the start button 4 times red then once white.
i disconnected heater still the same,
i checked the carbons ok also.
the door locks ok on test but when i try a program the start button just flashes and it wont start.
any ideas welcome.Re: zanussi zwf16070w
Machine was tried to be started without door closed, or door interlock faulty. E41 is door lock, wiring or p.c.b faulty.
By the way start l.e.d should flash 4 times red & 1 green when showing fault codes, you sure you were reading it correctly ?
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.