Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › BELLING 335si no main oven or both left hand plates
- This topic has 7 replies, 6 voices, and was last updated 14 years, 10 months ago by
gadgetdad.
-
AuthorPosts
-
June 8, 2011 at 10:17 pm #63270
gadgetdad
ParticipantInteresting one this – nasty Belling solid plate coooker, not seen one of this sort for years. Has no main oven and both left hand side plates not working. Expected it to be thermal fuses but both check out fine. Power in and out of oven tstat/switch, elements are not open circuit, power light not working but guess its blown as def has power to where it connects on tstat.
Bit lost on this one – should be working as far as I can see !!
gadget
June 8, 2011 at 11:54 pm #353255APG
ParticipantRe: BELLING 335si no main oven or both left hand plates
Sounds like either the live wire or neutral wiring to the connector block is not tight or a link is missing from the connector block
June 9, 2011 at 8:33 am #353256steve1
ParticipantRe: BELLING 335si no main oven or both left hand plates
hi
replace mains terminal blockJune 9, 2011 at 9:15 am #353257gadgetdad
ParticipantRe: BELLING 335si no main oven or both left hand plates
Hi guys, two replies along the same lines – is this a known problem then (not to me obviously) !
gadget
ps – can anyone point me at a suitable terminal block – I think Beko one might do.
June 10, 2011 at 12:41 pm #353258electrofix
ModeratorRe: BELLING 335si no main oven or both left hand plates
as with all problems like this you can proove it with a meter
obviously both ring and the oven are fed by one wire or if its 2 or 3 wires thay must be connected to the live connection block at the same place
probably one of the metal jumpers on the term block find it, short it and it should work then you can order part if reqdDave
June 10, 2011 at 2:40 pm #353259spimps
ParticipantRe: BELLING 335si no main oven or both left hand plates
Thermal cut outs (microtemps) in line from mains supplies to hobs and ovens,fastened in the back to chasis,take back off they are in heat shrink tubes.
Had one today 🙂
They come as part of the wiring harness by the look of masterparts list but a new one same value could easily be crimped in.Don’t know the rating but orange dome on it (had the contacts in today so will return with a few to repair).fleabayJune 10, 2011 at 4:33 pm #353260helo_75
ParticipantRe: BELLING 335si no main oven or both left hand plates
common
p/num 4410101001 (beko)
or 082635579include the new cut out and wiring required
June 10, 2011 at 6:45 pm #353261gadgetdad
ParticipantRe: BELLING 335si no main oven or both left hand plates
Thanks guys, test both the inline thermal fuses for continuity – both fine so going to revisit on monday with a Beko terminal block.
-
AuthorPosts
- You must be logged in to reply to this topic.
