Leisure (Cookmaster) CM 10 FRK – front control panel removal

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Leisure (Cookmaster) CM 10 FRK – front control panel removal

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 12, 2011 at 5:06 pm #63326
    spencer6001
    Participant

    Hi, Can anyone give me any help trying to remove a front control panel for the Cookmaster 100 (this is a Leisure brand). It is a dual fuel version. (Gas hob, electric plate warmer and electric ovens).

    I got a new control front panel as all the marking for the oven had worn off the old panel.

    I have removed the screws from below the panel, but it looks like I might need to remove the gas hob top to get at some top screws? wanted to check this before going too far.

    I did see in a Leisure service guide (for a different model) you remove the screws below and ‘slide the panel’ to the right to remove.

    Thanks in advance,

    June 24, 2011 at 8:01 am #353474
    BEKOBOY
    Participant

    Re: Leisure (Cookmaster) CM 10 FRK – front control panel rem

    You have to remove the complete top in order to gain access to the facia panel top fixing screws…bit of a bad on but the only way,

    July 7, 2011 at 6:01 pm #353475
    ecp
    Participant

    Re: Leisure (Cookmaster) CM 10 FRK – front control panel rem

    Hi did you manage to fix the new front control panel to your cooker?
    I think I have the exact same problem with a Leisure Cookmaster CM10FRK.
    I received the new front control panel today. I got the bottom screws out and can see 4 clips at the top, but it just won’t budge.

    Do I need to remove the whole top including the electric warming plate – if so, how did you do it.

    Very grateful for any advice.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.