Bosh srs431c12gb/23 drain pump removal

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosh srs431c12gb/23 drain pump removal

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 16, 2011 at 5:00 pm #63414
    allan73
    Participant

    Hi All,
    Can someone help a dishwasher novice and tell me how to remove the drain pump on the above.The access seems somewhat poor 😡
    Thanks in advance
    Allan.

    June 16, 2011 at 6:10 pm #353700
    Criscold
    Participant

    Re: Bosh srs431c12gb/23 drain pump removal

    Did one a couple of weeks ago – to only change the pump & not the housing. Remove plinth and metal plate from behind it and also outer door as this helps to give a bit more room to work. Remove transfer pipe from water inlet chamber to sump and the pump should just twist off.
    If you need to change the complete unit I found that the easiest way was to also remove the LH side panel and remove the pump hose from the water inlet unit – attach a piece of string to the pipe – pull the pump out of the rubber bung in the sump and then draw the complete pump with hose and string attached carefully thru the front of the machine – and then after changing pump feed the pump and hose back whilst pulling the string back thru
    -its fiddly but it works

    Colin

    June 16, 2011 at 7:12 pm #353701
    allan73
    Participant

    Re: Bosh srs431c12gb/23 drain pump removal

    Cheers Colin 🙂

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.