whirlpool adp262wh overfilling

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › whirlpool adp262wh overfilling

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 25, 2011 at 3:04 pm #63586
    spanishwhite
    Participant

    Hi Guys
    Had a call to the above They have had it for 2years but never used it “was 2nd hand and it has never worked”.
    Switched on and it fired up straight away,although it did seem to take along time to fill.Now when it is turned on it is overfilling with water flooding out of the small pipe linked to the overfill switch.
    As i have said before I don’t have a lot to do with d/washers but I would like to sort this one.
    Thanks Steve

    June 25, 2011 at 4:25 pm #354212
    electrofix
    Moderator

    Re: whirlpool adp262wh overfilling

    is there any fault codes showing? flashing lights

    look for blockages

    Dave

    June 25, 2011 at 4:35 pm #354213
    spanishwhite
    Participant

    Re: whirlpool adp262wh overfilling

    Hi Dave,no fault codes or blockages,however when i took the inlet valve off it was connected to what looks like a pressure switch.Took it apart gave it a clean.Washer now seems to be working fine.Fingers crossed.
    Steve

    June 25, 2011 at 11:12 pm #354214
    leavemetogetonwithit
    Participant

    Re: whirlpool adp262wh overfilling

    Do you mean the pressure thingy that’s part of the valve construction itself, as in many dw? I haven’t seen one on WHP but then have never looked!
    If it is such a “safety valve” then there’s a 50{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} chance you could be in for a recall as these are a pita for sticking intermittently.
    Mike.

    June 26, 2011 at 12:25 pm #354215
    spanishwhite
    Participant

    Re: whirlpool adp262wh overfilling

    Thanks Mike,having read your post I spoke to customer and have ordered a new one just in case.(they are paying)
    Steve

    June 26, 2011 at 12:37 pm #354216
    spanishwhite
    Participant

    Re: whirlpool adp262wh overfilling

    Just realised,it’s a Beko with a whirlpool badge.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.