Hotpoint WD64P Motor (rear plastic fixing)

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WD64P Motor (rear plastic fixing)

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 28, 2011 at 3:13 pm #63635
    MickGeorge
    Participant

    Hi Folks

    Been to this today and the rear motor fixing is broke on it – looks like the motor might have taken a wack from an off ballance load.

    Has anybody got the part no for the rear plastic fixing for this – it is the fixing that fits into the rear motor bracket with a metal pin that expands it and then pushes into the hole on the tub bracket.

    I have put this on this forum insead of the Parts one as when I searched I can only come up with the metal bracket(1600064)that, if memory serves me. screws to the tub. A Part No inquiry to Connect they are coming up with the same bracket as well. Have they done a mod to this and if so what is it and how would you fix this bracket to the tub? I thought the metal one fitted a different outer tub design?

    Thanks

    Mick

    June 28, 2011 at 4:35 pm #354375
    clivejameson
    Participant

    Re: Hotpoint WD64P Motor (rear plastic fixing)

    Hi Mick have a look HERE

    HTH?

    June 28, 2011 at 5:06 pm #354376
    MickGeorge
    Participant

    Re: Hotpoint WD64P Motor (rear plastic fixing)

    Thats the one – thanks Clive – looks like it is a special order job from either Connect or Masterpart 🙁 Qualtex not even listing the part.

    Many thanks

    Mick

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.