hotpoint wd440 F10 Pressure switch not sensing

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint wd440 F10 Pressure switch not sensing

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 7, 2011 at 5:36 am #63794
    nelson
    Participant

    I have the above machine displaying a F10 fault. The machine washes fine but displays the fault during the rinse cycle.

    I have checked and tightened all the connections at the module, cleared and cleaned the sump hose and pressure chamber and replaced the pressure switch, but the fault still persists.

    Can anyone help me?

    Cheers

    July 7, 2011 at 7:42 am #355017
    Martin
    Participant

    Re: hotpoint wd440 F10 Pressure switch not sensing

    nelson wrote:Can anyone help me?

    Could be either: –

    Slow fill/inlet valve time-out probs
    Button or coin in drain hose/pump/sump block probs
    or Module/or the connections to it

    July 7, 2011 at 10:58 am #355018
    nelson
    Participant

    Re: hotpoint wd440 F10 Pressure switch not sensing

    Cheers Martin,
    It always seems to go into fault mode as it is draining out on the rinse program. It is filling up nice and quickly, I have cleared the sump hose and pump, but in all honesty it seems to drain pretty quickly anyway, and I’ve tightened the connections to the module, so it looks like it may need a new module :rolls: fantastic.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.