Hoover washing machine 8yrs old

Home Forums Trade Technical & Spare Parts Forums Trade Technical Enquiries Hoover washing machine 8yrs old

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #63800
    scientist
    Participant

    Customer complaining of not spinning correctly. Brushes worn so I changed them. Put unit on spin but only rotated twice and sat there pumping out. No further action. Am I missing anything obvious? Checked pressure switch/chamber and connections. Any advice for me??

    #355026
    Martin
    Participant

    Re: Hoover washing machine 8yrs old

    The model number would be real handy right now! :rolls:

    #355027
    scientist
    Participant

    Re: Hoover washing machine 8yrs old

    Yes the model would be handy… Apologies. Model is a CA230.

    #355028
    Clives
    Participant

    Re: Hoover washing machine 8yrs old

    Check connections to motor tacho, wires brake at tacho, just check the resistance, it should be about 40 ohms i think. also check motor rotates both ways on wash.

    #355029
    suedehead1
    Participant

    Re: Hoover washing machine 8yrs old

    look for dry soldered joints on relays on small pcb.

    #355030
    helo_75
    Participant

    Re: Hoover washing machine 8yrs old

    or change the heater, whichevers quicker

    #355031
    scientist
    Participant

    Re: Hoover washing machine 8yrs old

    The one thing I did notice was it rotates one direction, I hear the click as if it’s going too rotate again but nothing happens. So it does appear to be only rotating one direction. So is it.. A. Tacho
    B. Motor
    C. PCB
    D. Heater
    E. None of the above.
    Won’t get back to this unit til Monday as they’re away. So going back fully armed!! Thanks for the replys lads..

    #355032
    suedehead1
    Participant

    Re: Hoover washing machine 8yrs old

    C

Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.