Whirlpool S20DRBB32-A/G

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool S20DRBB32-A/G

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 15, 2011 at 7:47 am #63953
    VillageIdiot2
    Blocked

    Help required!

    Unit runs for a short while, switches off then will not restart unless you power down and back on again. We’ve changed the PCB, Defrost heater and Thermal block but still seems to be the same.

    Any Whirlpool guys out there able to give any help?

    (8586 158 15000)

    Thanks, Ade 🙂

    July 15, 2011 at 4:06 pm #355626
    electrofix
    Moderator

    Re: Whirlpool S20DRBB32-A/G

    long shot

    have you tried a different socket
    ie bad socket = arcing = computer board lockups

    Dave

    July 17, 2011 at 7:33 am #355627
    boggoff
    Participant

    Re: Whirlpool S20DRBB32-A/G

    Do you loose the supply to the compressor? try running a seperate supply to the compressor only, you may have a compressor problem.15 years working on these never had fault like this

    July 17, 2011 at 11:33 am #355628
    VillageIdiot2
    Blocked

    Re: Whirlpool S20DRBB32-A/G

    Hi guys…

    Yeah it seems that when it gets to temperature, it shuts down and will not restart unless you power down. End result is unit warms up, alarm sounds, customer powers down and back on then unit runs again… It’s defo a weird one!

    Ade

    July 17, 2011 at 11:43 am #355629
    admin
    Keymaster

    Re: Whirlpool S20DRBB32-A/G

    Is the heater actually coming on ?

    bryan

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.