Beko WM8127S

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WM8127S

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 21, 2011 at 10:24 am #64065
    loopey
    Participant

    Stuck on 2 mins , switch on door locks shows 00.02 in the display
    checked all the usualls , no low insulation every thing megged fine . fitted new pcb and and its the same , i am stumped on this one . :bang: .

    July 21, 2011 at 12:58 pm #355938
    Criscold
    Participant

    Re: Beko WM8127S

    I don’t know this machine,This may be a silly question & I know you say you tested everything but could the 2 be an error code
    error 2 = heater o/c. If you need test info let me know

    Colin

    July 21, 2011 at 1:29 pm #355939
    loopey
    Participant

    Re: Beko WM8127S

    I shal check that out , yes please iff you could send the test info thanks colin

    phil

    July 21, 2011 at 1:40 pm #355940
    Criscold
    Participant

    Re: Beko WM8127S

    You should have mail

    July 21, 2011 at 1:56 pm #355941
    loopey
    Participant

    Re: Beko WM8127S

    well i found what it was , the selector switch little brass
    brush had gone missing

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.