- This topic has 6 replies, 5 voices, and was last updated 21 years, 6 months ago by
.
-
Posts
-
When the machine is on the F (Spin) position it spins at 600rpm okay. but after a minute or 2 when starts to increase to 1000 rpm the mains breaker trips out the supply!
If the 600 switch is selected the machine does not trip the breaker!
Any thoughts?
Regards
PaulM
Re: Bosch WVF2000 – Trips Breaker on 1000 Spin
It sounds like a motor related problem to me.
It could be something as simple as carbon dust causing it or at worse the armature breaking down on high speed.
It may sound daft but just before it spins, turn the lights off and put your head near the floor, see if you can see any sparking going on under the machine.
Dave.
Re: Bosch WVF2000 – Trips Breaker on 1000 Spin
could be a wiring harness fault just check the wiring around the motor block as they may be chaffing or shorting as the machine will move a bit more as it speeds up………just a maybe !
Most likely motor brushes worn down – I suspect this what Dave is gettihg at with the Lights Out bit!
BTW Paul, if it is the brushes you’ll hear them as
it ramps up to high spin – a sort of crackling, roaring noise.Regards,
Penguin45.Penguin45 wrote:I suspect this what Dave is getting at with the Lights Out bit!
Indeed it was. Not knowing peoples level of confidence or competence, it’s an easy (ish) way to check for brush wear.
Dave.
Re: Bosch WVF2000 – Trips Breaker on 1000 Spin
There’s no apparent sparking coming from the motor.
Also, the breaker doesn’t trip when there is no washing in the machine!I changed the brushes about a year ago but will check them and look at the wiring harness.
Thanks for your suggestions
Paul
- You must be logged in to reply to this topic.