- This topic has 1 reply, 2 voices, and was last updated 14 years, 8 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hi Guys,
The above dishwasher drains for 2 mins or so then displays F4,
I tried cleaning the water indicator grid as best i could but no change.
Any ideas?
ThanksRe: Bauknecht GSF7199 F4 Fault
F4 is a pumping related fault, either pump or outlet are blocked, pump o/c or if straight away and no water present in sump then the DPC (diaphram switch) may need replacing, can sometimes clean with very hot water, I use a big syringe and clear them, its inside the sump on right hand side, if cleaning doesn’t work then will have to replace
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.