fault codes

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › fault codes

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • August 16, 2011 at 5:53 pm #64543
    clockworkone
    Participant

    powerpoint idw12(seems to be an irish brand of rubbish )customer has one that wont progress and is showing e3.are these kenwood or haier copies.anyone got any idea on the fault codes.think may be temp or heater related.paul

    August 16, 2011 at 7:39 pm #357341
    Seamy
    Participant

    Re: fault codes

    E3 is a drain fault, they’re distributed by
    Shomar Ltd
    Unit 9 Western Industrial Estate
    Dublin 12
    Ireland

    T: 01 450 9150

    Fault codes are here ….
    http://www.shomar.ie/PP1000WM_IB.pdf

    August 16, 2011 at 8:26 pm #357342
    clockworkone
    Participant

    Re: fault codes

    thanks seamy,should have said this one is an int dish washer.have spoken to cust since and he says it finishes program but no heat.paul

    August 17, 2011 at 5:03 pm #357343
    Seamy
    Participant

    Re: fault codes

    Likely its a Belling type d’washer, if so its a problem that can be cured by tweeking the pressure switch slightly to take in slightly more water. Level switch gets deactivated & heater drops out due to low level filling.

    August 17, 2011 at 6:25 pm #357344
    dave-m
    Participant

    Re: fault codes

    The heaters on these go all the time, it’s a banana shaped heater one on the inside of the machine, a quick change with the side off. HTR76 is the number in my local Qualtex supplier.

    Dave

    August 18, 2011 at 9:34 pm #357345
    clockworkone
    Participant

    Re: fault codes

    thank you seamy and dave. i see quinns quoting haier part nos for these machines.paul

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.