hotpoint boots

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint boots

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • August 18, 2011 at 9:59 am #64577
    wilf
    Participant

    Anyone know the difference between 1605550 and 1605335 there listed seperately for wf and wt but I cant see any difference. For the second time I’v just fitted a 1605550 (gsk9197) to a wt960 where a 1605335 is listed seems a perfect fit. Not had any problems.

    wilf

    August 18, 2011 at 1:22 pm #357447
    Martin
    Participant

    Re: hotpoint boots

    Jim’s your man on the subject but my guess is one fits a welded drum the other a split drum maybe?

    August 18, 2011 at 3:03 pm #357448
    timdowning
    Participant

    Re: hotpoint boots

    I may be wrong, but on the higher spin models aren’t there drain holes all the way round the door seal rather than just at the bottom??

    I had a FEW12 that had a welded tub with a WMA front panel. Tried a WF seal and WMA but neither fitted. Customer in the end was happy with me cleaning and refiting. FEW I thought. That was a crap pun wasn’t it.

    August 18, 2011 at 3:36 pm #357449
    iadom
    Moderator

    Re: hotpoint boots

    😕

    Hmm, not had cause to order or use a 1605335 yet. Fit loads of 1605550 ones though.

    May order one just to compare them. 🙂

    Jim.

    August 18, 2011 at 7:54 pm #357450
    helo_75
    Participant

    Re: hotpoint boots

    different drums, different sizes depending on commercial codes

    welcome to our world

    August 19, 2011 at 7:26 am #357451
    wilf
    Participant

    Re: hotpoint boots

    I checked the boots carefully and could not see any difference at all and as I said fitted perfectly.

    wilf

    August 19, 2011 at 6:40 pm #357452
    washtronics
    Participant

    Re: hotpoint boots

    i used to work for hotpoint and never fitted the 1605335, always fitted 1605550 fits all wf and wt machines but not wma

    August 19, 2011 at 7:22 pm #357453
    iadom
    Moderator

    Re: hotpoint boots

    Just got hold of a 1605335 this afternoon.

    It does say 7kg on the inside of the small locating flap and on the outer edge it has EPDM which the 1605550 doesn’t but if I line it up against a 1605550 I can see no difference at all. :con:

    Jim.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.