- This topic has 4 replies, 2 voices, and was last updated 14 years, 7 months ago by
.
-
Posts
-
I inadvertantly left the salt cap off after initial fill up (day doing accounts then a tricky install head a little fried to say the least 🙁 ) so hopefully that hasn’t caused the problem.
On first test after install, select programme and it drains as normal, fills nearly to wash level then beeps, drains and shows a tap sign in the display.
The customer is Mr Fussy , charidee golf, round table, pringle and farrah man so, to say the least, I just want this one out the way. Already had to knock him money off as sales at Swift told me this was a s/s base and not polynox 👿 .Any ideas???
TonyRe: Bosch SMV53A00gb/03 failed after install
Hi, I had one like this that was connected to a cut in tap. I found that the tap even though it looked fully open wasnt letting very much water through.
RayRe: Bosch SMV53A00gb/03 failed after install
The thought had crossed my mind as the tap is fairly stiff to turn off/on. The machine is fairly slow to fill, but is almost to level when the programme aborts.
Tony
Re: Bosch SMV53A00gb/03 failed after install
Not 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} on this mate but is it possible that it has a time to fill in and if it doesnt get to the right level in that time it will abort?
- You must be logged in to reply to this topic.