Bosch SHV55M03GB/79

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch SHV55M03GB/79

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • September 4, 2011 at 11:12 am #64840
    rocker
    Participant

    Customer tells me when pressing the reset the timer goes to 0 then drains, but when trying to reset a new programe it will go stright to auto only, there is a tap warning light showing.
    my question is will this fault cause the timer problem.
    I feel it wont, but I could be wrong,so need advice. before buying a new timer.
    thanks John

    September 5, 2011 at 1:05 pm #358250
    rocker
    Participant

    Re: Bosch SHV55M03GB/79

    any help plesae

    September 5, 2011 at 1:16 pm #358251
    jeremy
    Participant

    Re: Bosch SHV55M03GB/79

    impellor jug is common to fail on these.

    September 5, 2011 at 1:28 pm #358252
    Martin
    Participant

    Re: Bosch SHV55M03GB/79

    rocker wrote:I feel it wont, but I could be wrong,so need advice. before buying a new timer.

    By “timer” I guess you mean control module and that would be the last option to consider. Almost always it’s a gunged-up pressure chamber/transfer pipe or flooded base tray. What have you checked so far anyway?

    September 5, 2011 at 2:55 pm #358253
    rocker
    Participant

    Re: Bosch SHV55M03GB/79

    martin, about 2 weeks ago I removed the side tank water & level unit and fill hose to tub cleaned all parts.customer told me then I noticed a problem chaning programs after this work was done. ie contol module programes very intermittent.
    possible module fault !!! what do you think.
    thanks John

    September 5, 2011 at 4:46 pm #358254
    Martin
    Participant

    Re: Bosch SHV55M03GB/79

    Could be silted up turbidity sensor if prog times irratic?

    Sent from my GT-I9000 using Tapatalk

    September 5, 2011 at 5:38 pm #358255
    rocker
    Participant

    Re: Bosch SHV55M03GB/79

    Martin, thanks for your response sorry to show my ignorance but can you please let me know where to find this sensor.
    Is it the heater ntc sensor !!
    thanks john

    September 5, 2011 at 7:36 pm #358256
    Martin
    Participant

    Re: Bosch SHV55M03GB/79

    It’s the infra red sensor on the side of the heater unit. Generally only operates on ‘auto’ cycles though. Impellor jug also a caution as already been mentioned. Dont suspect module though at this stage. HTH?

    Sent from my GT-I9000

    September 5, 2011 at 8:02 pm #358257
    rocker
    Participant

    Re: Bosch SHV55M03GB/79

    Martin, many thanks for your help. john

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.