Hotpoint WDD960

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Hotpoint WDD960

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 6, 2011 at 10:02 am #64876
    clivejameson
    Participant

    Having trouble finding the correct inlet valve for this one…the original seems to have an extension to the incoming side but the replacements don’t which means the valve doesn’t reach the back panel for mounting correctly. The extension is bonded on (or not which is why it was leaking!)…has anyone else come accross this or got a part number for the correct valave please?

    September 6, 2011 at 11:30 am #358354
    DDSDDS
    Participant

    Re: Hotpoint WDD960

    seem to remember something similar and needed a new dispensor assembly too

    September 6, 2011 at 11:35 am #358355
    Martin
    Participant

    Re: Hotpoint WDD960

    The valve comes as part of the dispenser assy (C00269609) which may be shorter than the original and in order to link the hose to the valve you’ll also need a ‘Valve Mounting Plate'(C001199371)

    HTH? 😀

    September 6, 2011 at 8:00 pm #358356
    clivejameson
    Participant

    Re: Hotpoint WDD960

    Cheers for that Martin…i suspect there’s too many ‘1’s in that last number and that throws up the plastic support panel for the valves at the back but going on description i’ve ordered the VMPlate from connect so we’ll see what arrives.
    Thanks again.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.