Zanussi ZWF1621W just stops

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZWF1621W just stops

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • September 6, 2011 at 1:09 pm #64880
    Martin
    Participant

    Yet another mystery Zanussi fault. Symptoms: Select 40deg Eco wash, fills, tumbles and heats. At some point it simply stops and the Start/Pause LED just flashes. Turn machine off and select rinse-spin cycle then it works as normal, drains, rinses, spins and the turns off, no probs.

    I interrogated the ‘last error code’ and it flags up E23. (Pump triac, pump faulty, wiring faulty, circuit board faulty) and in the absence of not finding fault with other components I replaced the pump. (which was well worn anyway as it happens).

    Customer uses it straight after, exactly the same, stops mid cycle full of hot wet soapy with Start/Stop LED flashing. Turn it off, check last error (E23). WTF? :con:

    Customer well pi&&ed off and after looking at price of a circuit board, so am I. 👿

    September 6, 2011 at 3:04 pm #358363
    dave-m
    Participant

    Re: Zanussi ZWF1621W just stops

    Not sure if this is much help Martin,
    But we’ve been thru similar before….

    viewtopic.php?f=3&t=64042

    September 6, 2011 at 3:35 pm #358364
    Martin
    Participant

    Re: Zanussi ZWF1621W just stops

    Thanks dave-m but no sorry, fault quiet different in this instance, thanks anyway. 🙂

    September 7, 2011 at 2:00 pm #358365
    jag-12
    Participant

    Re: Zanussi ZWF1621W just stops

    Had a zwf1421 doing similar.Same error code.Sat watching it and just before it failed it did a short burst at spin speed then just sat doing nothing.
    Changed the motor and it has worked fine since.

    September 8, 2011 at 4:31 pm #358366
    deltra
    Participant

    Re21W just stops

    water inlet valve???

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.