Bosch WTL6106GB/07

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WTL6106GB/07

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 12, 2011 at 6:00 pm #65004
    dave-m
    Participant

    Have one of these which is not heating properly, it seems to sometimes put out low or medium heat, but never full heat and it just keeps going with no fault codes, (although I don’t have the codes for this machine…anyone?)
    Timed dry also puts out lower than normal heat.
    Found a blockage in the base of the pump and removed it and cleaned everything out completely but no change.
    Before I go ordering parts, does any one know what readings I should get across the heater, NTCs etc.

    Cheers

    Dave

    September 13, 2011 at 1:20 pm #358771
    Martin
    Participant

    Re: Bosch WTL6106GB/07

    dave-m wrote:Before I go ordering parts, does any one know what readings I should get across the heater, NTCs etc.

    The heater is rated at 700w and 1800w respectively.
    Heater NTC = 25k Ohm at room temp (approx)
    Front duct NTC = 10k Ohm at room temp (approx)

    September 13, 2011 at 2:06 pm #358772
    dave-m
    Participant

    Re: Bosch WTL6106GB/07

    cheers martin.

    dave

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.