- This topic has 1 reply, 2 voices, and was last updated 14 years, 6 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hi all this customer is complainingof the machine doing the cycle fine but at the end showing the drain/no spin light on and not letting the door open she has to unplug to allow to open,it sounds like pcb fault has anyone had this before?
cheers chris
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.