Re: Indesit IWDC6105
you can work out most interlock connections
you need a meter and a plug and lead with 2 terminal to connect to lock
use meter to find which terminals are the heater
the one i have here is an old hoover one and the heater is terminals 1 and 3
connect lead to these terminals and plug in
when lock has powered slide lock mech till it locks
unplug mains and using a meter fing out which two terminal are now short circuit
with my lock its terms 3 and 2
now on my lock your red wire will go on term 1
after that the other 2 dont matter but only 1 way will work
the red may supply a live or neutral to the lock to energise so as long as this wire is in the right position you wont blow the machine
you say that one brown wire is live and the other is neutral but in actual fact one wire is live and the other is the switch wire that becomes live after the lock closes
hope this helps
Dave