Brushes for a Whirlpool AWM8143 (complete with holder)

Hi

I hope someone can help me brushes for a Whirlpool AWM8143.
The Whirlpool service manual states that they are: Part No: 4812 362 48004 Brush, carbon motor CESET. However I have discovered that for my machine that is not the case.

The motor has a part number: 461971077351. When I Google this all the hits are in German, sounds like it may be a BAUKNECHT machine rebadged by Whirlpool?

I need 2 brushes and if not the whole brush holder then at least the brass guides as well. The plastic holder has the following number on it: 165 60010 PBT and its got a socket for a spade connector, the position of this socket is important.

Any help would be appreciated I have been searching for this for quite a while.

I believe they are 35 or 36mm (12×5) brushes and I have seen similar on line for Siemens and Bosch machines, problem is they were the brush only and I also need the brass guide as well.

Re the pics of the open holder, ignore the cut on the left, that’s a hacksaw cut to try to make the wrong guide fit. The black pointer is showing where the correct guide should anchor in the holder.

thanks in advance

Tom