- This topic has 7 replies, 4 voices, and was last updated 14 years, 6 months ago by
.
-
Posts
-
The visual led that activates the two push buttons had broken
I tested the pcd (without this part) and it started a cycle so I then ordered the visual led, when I fitted the part..I was unable to change the programe it is stuck on the 1st end light showing..according to the manual both end light should be showing !!! have tried to reset. nothing happens any advice would be helpful. if the pcb had gone it doesn’nt explain why it worked on first call.
thanks JohnRe: Smeg DF614WE ( D/W)
Martin wrote:The Control Panel I would think?
Why, exactly? is there some other meaning to the term LED?
If he means the levers that control the pcb, there is a mod for this, which comprises of 2 parts, if you dont fit both then the buttons are not operating the switch on the pcb.
769350131 PCB support
764730267 levers.Re: Smeg DF614WE ( D/W)
yes it is the leaver unit that controls pcb…I have fitted the new unit both parts..and are operating both pcb buttons…but cant reset pcb
Re: Smeg DF614WE ( D/W)
is the wash programme still running then when you shut the door and press start?
need to keep that button down for a good 5 secs with the door shut to reset.Smeg DF614WE ( D/W)
eastlmark wrote:is the wash programme still running then when you shut the door and press start?
need to keep that button down for a good 5 secs with the door shut to reset.Agree with Mark ,sounds like you need to cancel program ,these things break a the time hence mod kit
—
I am here: http://maps.google.com/maps?ll=52.053664,1.122915
- You must be logged in to reply to this topic.