- This topic has 13 replies, 3 voices, and was last updated 14 years, 6 months ago by
.
-
Posts
-
been out to a hoover h160e – 80
wasnt draining or pumping, so first stop filter and carbons, filter clean, brushes worn low so replaced carbons and tested. still no drain but had spin.
so put a connect askoll pump on as old plaset type was dead and bulging – overheated. still no drain so found main pcb (side mount) and one of the legs of the triac on TR5 is burned right out.
spec on triac was:
MAC
97A8 or 97AB
243anyways, not big into module component replacement but took out a scrappy bearing failed 7.5k nextra last week, so harvested its pcb before ditching and its got same size triacs, but with different codings. anyhoo, soldered out the triac in the same TR5 position, and its got this on it:
(logo – st?)
ZUG07 / ZU607 / Z0G07 / Z0607
MA
75 521What i wanna know is it gonna be compatible? according to connect both machines can use same pattern pump…
anyone (mike?) help me out here ?Re: hoover h160e pcb repair – which pump triac – is this ok?
The triac is MAC 97A8 .. We have some of them in stock if you can’t find a reclaimed one.
George
Re: hoover h160e pcb repair – which pump triac – is this ok?
had a look but nope not come across one, dont really want to buy 50x or so of tinternet. so how much £££ for 1x inc p&p sir allsort?
Re: hoover h160e pcb repair – which pump triac – is this ok?
MAC 97A8 Triac for Hoover Candy module repairs
There is the item and it is showing we have 9 left in stock… How many do you need?
Re: hoover h160e pcb repair – which pump triac – is this ok?
didnt know u were on ebay.
just the one is required, im confident enough i wont balls it up twice 😀
Re: hoover h160e pcb repair – which pump triac – is this ok?
have found a/s! cheers. have also since spotted a wil133 test module with “mac-type” triacs attatched. gonna heat one of those out and try it. if the hoover completes 3x test runs ok ill get a replacement “mac triac” off you to put back on my test wil133 pcb 😛
cheers dude!
Re: hoover h160e pcb repair – which pump triac – is this ok?
Before you try it.. download the datasheet for the triac mac97a8 you have and the one you are going to try replace it with so that you can see the operation of each… These mac triacs are Logic level Sensitive Gate triacs. I wouldn’t want you to trial the wrong chip and destroy your board.
Re: hoover h160e pcb repair – which pump triac – is this ok?
ah hah, the 133 triacs are mac97a8 too, but they have a different 3 digit number under it – 537 or something iirc, is that just the batch code?
Re: hoover h160e pcb repair – which pump triac – is this ok?
not sure… Mac97a8 is the important part.
George
Re: hoover h160e pcb repair – which pump triac – is this ok?
My God, things must be tough going up there, wherever you guys are!
MAC97 Qty 1 @ 46p + vat including g’teed next day delivery. OK you need to open an account. It takes a few minutes and maybe you have to give them your card details. They never hassle you for more business by phone – I spend about £30 a year and all I get is an occasional email which I just delete like the Tesco ones. How can you run a shop and still have time to desolder 50p components?
Mike.Re: hoover h160e pcb repair – which pump triac – is this ok?
everyone knows i dont sleep 😀
and it only takes me a few seconds to pop one out (?!) if im lucky and dont have the old shakey hand. i was fixing the van keyfob blipper at the same time anywya as the micro switch had snapped off
takes longer to warm the iron up…
Re: hoover h160e pcb repair – which pump triac – is this ok?
leavemetogetonwithit wrote:My God, things must be tough going up there, wherever you guys are!
MAC97 Qty 1 @ 46p + vat including g’teed next day delivery.
Mike.That’s a Mac97A8G Mike… Different monster so I am informed (by RS & Farnells)
George
Re: hoover h160e pcb repair – which pump triac – is this ok?
Allsorts wrote:
That’s a Mac97A8G Mike… Different monster so I am informed (by RS & Farnells)
George
Not time to look into it just now but I cannot believe that the difference between two components, both labelled MAC97A8, would be at all significant at the level we’re talking about. If it was, there would be boards blowing up all over the plan….
mmmmmmm………Hang on a minute, maybe you’ve hit on something…. 😆
Mike.
- You must be logged in to reply to this topic.