Zanussi Fan Over (fitted) ZBS260X not getting hot

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Zanussi Fan Over (fitted) ZBS260X not getting hot

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 16, 2011 at 5:26 pm #65680
    Hugosp
    Participant

    Hi

    As the title says really. The oven is turned up to 250 deg c and one can put their hand in there. There is warmth but it’s definitely not getting hot. Are we talking element here?

    Thanks

    October 16, 2011 at 5:33 pm #361537
    kwatt
    Keymaster

    Re: Zanussi Fan Over (fitted) ZBS260X not getting hot

    Probably the element.

    Are you sure about the model number as I can’t locate that at all anywhere.

    K.

    October 16, 2011 at 5:53 pm #361538
    Hugosp
    Participant

    Re: Zanussi Fan Over (fitted) ZBS260X not getting hot

    Thanks for looking for me. I’ll need to double check. It’s in our rented property. it’s about 3 years old and came from B and Q IIRC

    October 19, 2011 at 9:10 pm #361539
    Hugosp
    Participant

    Re: Zanussi Fan Over (fitted) ZBS260X not getting hot

    Just an update. All fixed thanks. I removed and carried out an insulation test on the element. Then I managed to find and fit one.

    Biggest problem I had was that the 4 screws holding the back panel in had rusted, and so had the holes. That made putting the panel back in the oven afterwards. I just used some thicker screws I found and secured it back.

    The model number was correct btw. I also needed a product number to source the element.

    Element was £35 – ouch! I had to get it fixed that day though. It’s in a property we let out and I don’t like to keep tenants waiting.

    Thanks for your efforts in looking for the model number btw.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.