d/w stuck on prog.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › d/w stuck on prog.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • October 17, 2011 at 6:53 pm #65695
    mike100
    Participant

    Lamona HJA8630 d/w stuck on 70c wash which it does ok but you cannot change to any other prog.
    Mike 😕

    October 17, 2011 at 8:22 pm #361562
    Allsorts
    Participant

    Re: d/w stuck on prog.

    Try switch it off, then whilst holding down the program button switch it on again, then switch off again, then switch on as normal.

    May work. I had to do this on another D/W this week.

    George

    October 17, 2011 at 9:23 pm #361563
    A1engineer
    Participant

    d/w stuck on prog.

    Had one of these with a faulty user board not the main pcb but the little one you press to change program, cheap enough to fix but kinda weird as the switch seems to click just doesn’t move.

    October 17, 2011 at 9:28 pm #361564
    eastlmark
    Moderator

    Re: d/w stuck on prog.

    you do need to hold down the pause button for about 15 secs to rest on this one, seems an age.

    October 27, 2011 at 8:12 pm #361565
    mike100
    Participant

    Re: d/w stuck on prog.

    Thanks for that.

    Do you happen to have the part no for the user board as I think it may well be that.
    Mike

    October 31, 2011 at 5:01 pm #361566
    mike100
    Participant

    Re: d/w stuck on prog.

    Ok, resolved this one now.
    It was the long reset as you suggested.
    Thanks for help.
    Mike

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.