Bosch was28466 F43

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch was28466 F43

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 10, 2011 at 2:08 pm #66205
    bazza500
    Participant

    Hi,
    Went to this with F43 showing and found brushes worn. I have replaced the brushes but after the machine is switched on for about 3secs then the F43 comes back on the display. This is before pressing the start button and it doesn’t matter what program is selected.
    Does this machine need reset after a fault is fixed? I have checked the motor and it is fine.

    Barrie

    November 10, 2011 at 2:34 pm #363456
    timdowning
    Participant

    Re: Bosch was28466 F43

    Yep reset as the WAE range.(Did one a few weeks ago.)

    November 10, 2011 at 2:56 pm #363457
    bazza500
    Participant

    Re: Bosch was28466 F43

    Where do I find the reset sequence?

    November 10, 2011 at 3:04 pm #363458
    timdowning
    Participant

    Re: Bosch was28466 F43

    Here you go:

    Set selector switch to off then turn the selector switch to the 6 o’clock (spin) position. Then press and hold the spin speed selector button whilst turning the selector switch one more click to the 7 o’clock (drain) position. Release spin button then turn selector to off.

    I just searched F43 to get this in case you need more info.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.