Zanussi WJD1257 no heat – UK Whitegoods

This topic has 8 replies, 5 voices, and was last updated 21 years, 5 months ago by machineman.

Viewing 9 posts - 1 through 9 (of 9 total)

Author

Posts
October 25, 2004 at 6:56 pm #6621

machineman
Participant

hi everyone , mc blew a fuse now no heat checked heater all ok configured pcb still no heat any ideas, could it be something other than the board.m

October 26, 2004 at 3:17 pm #118699

machineman
Participant

Re: zan wjd 1257 no heat

anybody there .m

October 26, 2004 at 3:24 pm #118700

Martin
Participant

Re: zan wjd 1257 no heat

machineman wrote:anybody there .m

Sorry can’t help on this one 🙁 But pm Alex as he is a bit of an expert I believe :tup:

Martin

October 26, 2004 at 3:40 pm #118701

Dave_Conway
Participant

Re: Zanussi WJD1257 no heat

Are you absolutely sure the heater is OK ?

October 26, 2004 at 5:30 pm #118702

machineman
Participant

Re: Zanussi WJD1257 no heat

yeah took back off filled m/c no neut to htr tested cont and earth leakage all ok comes up as code e55

October 26, 2004 at 6:22 pm #118703

lokring
Participant

Re: Zanussi WJD1257 no heat

well! acording to the diagnostics e55 is an open circuit motor/ciruit, thats thrown a spanner in then!

October 26, 2004 at 6:51 pm #118704

machineman
Participant

Re: Zanussi WJD1257 no heat

sorry looking at wrong table. e66 heater ele relay fault m

October 27, 2004 at 10:56 pm #118705

lokring
Participant

Re: Zanussi WJD1257 no heat

ahh! give the thick grey wires around the presure switch a tug could be a fault in that area!

October 27, 2004 at 11:06 pm #118706

SL
Participant

Re: Zanussi WJD1257 no heat

🙄 Check the NTC has not been damaged or has burnt. This will stop the heater relay from switching on, also check that the safety level part of the pressure system is closed as this provides the neutral to the heater.
Author

Posts

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic.