Zanussi ZWF 1632

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Zanussi ZWF 1632

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 17, 2011 at 11:00 am #66323
    Robjones
    Participant

    Zanussi ZWF 1632.

    I have a problem with the above machine stopping after wash cycle, wash light on and nothing else flashing. Sometimes stops with wash, rinse and spin lights on with start light flashing. Turn power off/on and skip to next step and then finishes as normal.

    Stops after draining water so pump ok, checked drain pipe and pipe to pressure switch – both clear.

    Any ideas?

    November 17, 2011 at 9:39 pm #363795
    Seamy
    Participant

    Re: Zanussi ZWF 1632

    Maybe motor brushes worn, power off while working on it!

    November 18, 2011 at 11:17 am #363796
    Robjones
    Participant

    Re: Zanussi ZWF 1632

    Thanks for reply.

    Checked brushes this morning, look ok. No signs of arcing and approx 20mm left in brush holder.

    Whilst machine was apart cleaned all connectors with electrical cleaner to see if this helps.

    What’s the average call out charge for an engineer? Just weighing up if to call someone out or replace machine.

    November 18, 2011 at 11:12 pm #363797
    Robjones
    Participant

    Re: Zanussi ZWF 1632

    Still the same, did an empty wash ok after I put it back together but failed tonight on a wash with clothes in.

    Back to the drawing board.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.