Lux erl6297xsi f/f error code EF

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Lux erl6297xsi f/f error code EF

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 17, 2011 at 3:13 pm #66326
    mbdas
    Participant

    Hi been to this and getting EF as soon as u plug it in but the evaporator fan motor seems to be running may be a bit fast,just wondering if anyone has had same problem as not sure which to replace pcb of the fan motor, first one of these I’ve seen.
    Thanks Mark

    November 17, 2011 at 9:37 pm #363804
    Seamy
    Participant

    Re: Lux erl6297xsi f/f error code EF

    EF means Evaporator Fan, some of these run a function test when plugged in, may run defrost heater, fan, compressors etc for a while.
    Theres a pretty good service manual available for them if you have access to TDS, with tests routines, diagnostics etc.

    November 18, 2011 at 2:24 pm #363805
    mbdas
    Participant

    Re: Lux erl6297xsi f/f error code EF

    Hi got old Tds 08 v2 but that model not on it , I’ve put it in service mode but the evaporator fan is running all the time as u put it through test mode,I would say it’s the module but which one controls the fan motor?also the pnc is not listed on lux web site
    928465049-000 also the guy has been monkeying around with it and I’ve got a sneaky feeling it’s half inched. 😕
    Mark

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.