Miele W487WPS W/M problem

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Miele W487WPS W/M problem

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 21, 2011 at 8:22 pm #66405
    jontymox
    Participant

    Good evening all,

    Has anyone come across both the “check inlet and check drain”
    lights flashing in unison on the above m/c?

    This occurs only 2 or 3 times per month on a customers’ m/c and refers to “waterproof system has activated.”

    I have inspected the m/c for leaks, which aren’t evident, and wonder if there is a faulty sensor causing the problem.

    If so, I wonder where this sensor is located in order for me to test it, or if there is another cause.

    Best wishes,

    jontymox

    November 22, 2011 at 9:46 pm #364100
    Seamy
    Participant

    Re: Miele W487WPS W/M problem

    Water in base most likely the culprit, can also be gunged up pressure vessel.

    November 22, 2011 at 10:06 pm #364101
    leavemetogetonwithit
    Participant

    Re: Miele W487WPS W/M problem

    A likely reason for water in base is door seal dribbling due to one or other of the usual reasons. On these new Mieles it seems to be directed into the collector pan.
    Mike.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.