Hotpoint Washing Machine Bearings

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hotpoint Washing Machine Bearings

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 27, 2011 at 1:18 pm #66518
    kickass47
    Participant

    Hi
    Before I strip my machine down, does anyone know if the sticker on the back of my Hotpoint Aquarious Washing Machine gives shaft size details to change bearing set

    The sticker says:- 0035 WMA46N 15143606

    Also would it be recommended to change the spider at the same time

    Regards

    Chris

    November 27, 2011 at 2:27 pm #364414
    iadom
    Moderator

    Re: Hotpoint Washing Machine Bearings

    TBH you would be far better off stripping the machine down first before you order anything.

    Then you can find out which bearings it has, if they will actually come out of the drum and also see if the drum shaft is damaged.

    November 28, 2011 at 7:15 pm #364415
    washtronics
    Participant

    Re: Hotpoint Washing Machine Bearings

    the 0035 should state that the bearings are the 35mm type and not the 30mm type

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.