fdw60p error lights

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › fdw60p error lights

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • December 6, 2011 at 9:29 am #66692
    150darrenj
    Participant

    Hi,Hope you can help me with my dishwasher.It is 2 years old
    and has just started to display flashing leds on 4 and 6.
    (fast and delicates.)This was when i selected a normal wash
    cycle. I selected the fast wash cycle to see if the same
    fault appeared but it successfully completed the cycle
    with the flashing drying led.
    I would be grateful if you could shed any light on this fault.
    Thanks
    Darren

    December 6, 2011 at 10:28 am #364900
    iadom
    Moderator

    Re: fdw60p error lights

    Classic and very common fault on these Indesit made appliances. :rolls:

    No heat fault, 90{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the time it will be either the heater or the control PCB.
    A resistance/continuity test of the heating element after first removing the mains plug would be the first step, if that is OK then its likely to be the PCB.

    A few different PCB’s used on these so all of the numbers on the rating plate needed to identify correct part, PCB is around £70+.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.