Hotpoint Dryer TCM570

This topic has 1 reply, 2 voices, and was last updated 14 years, 4 months ago by Kez.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
December 6, 2011 at 11:03 pm #66716

Kez
Participant

Been out to TCM570 condensor dryer, its in a warm room, its collecting water in the tank ok but a small amount of water is collecting in the rear fan housing causing it to trip the electrics. Does any one know if there is a modification on this or what might cause this? Thanks for our help. Kez

December 6, 2011 at 11:49 pm #364990

Firestarter
Participant

Hotpoint Dryer TCM570

There is probably a partial blockage between the collection chamber to the rear of the condenser and the water container. This causes condensed water to travel along into the rear fan. Strip it all down giving it a good clean, perhaps fitting a shaft and seal kit as you go
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.