Hotpoint Dryer TCM570

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #66716
    Kez
    Participant

    Been out to TCM570 condensor dryer, its in a warm room, its collecting water in the tank ok but a small amount of water is collecting in the rear fan housing causing it to trip the electrics. Does any one know if there is a modification on this or what might cause this? Thanks for our help. Kez

    #364990
    Firestarter
    Participant

    Hotpoint Dryer TCM570

    There is probably a partial blockage between the collection chamber to the rear of the condenser and the water container. This causes condensed water to travel along into the rear fan. Strip it all down giving it a good clean, perhaps fitting a shaft and seal kit as you go

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.