Miele T490

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Miele T490

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • December 22, 2011 at 2:12 pm #67029
    bazza500
    Participant

    Anyone have the part numbers for the heater relay and drum carbons on this tumble dryer please.


    Barrie

    December 22, 2011 at 2:49 pm #366022
    don
    Moderator

    Re: Miele T490

    Hi Barrie

    Have a look at the two drawings and let me know which positions you are after.

    The part numbers will be on the old parts if you have them 😉


    Don

    December 22, 2011 at 4:21 pm #366023
    bazza500
    Participant

    Re: Miele T490

    Hi Don,

    Your drawings are a bit small but I can get the drawings up on Connect and it’s part no. 9 on the components drawing and 41 (I think) on your top drawing.

    Do you have the part numbers for these?

    December 22, 2011 at 4:33 pm #366024
    don
    Moderator

    Re: Miele T490

    Hi Barrie

    Item 41 on drum page is indeed the carbons part no. 4490382 but no. 9 is a rubber cushion.

    Don

    December 22, 2011 at 6:57 pm #366025
    bazza500
    Participant

    Re: Miele T490

    Hi Don.

    Thanks for the carbons number. The number 9 is not on the drawings you have posted but is on the Connect site under the drawing called “components”. Can ytou get the part number from that?

    Thanks, Barrie

    December 22, 2011 at 8:02 pm #366026
    bazza500
    Participant

    Re: Miele T490

    Having read a few posts on this forum it would seem that the carbons being worn and jumping off the nut would cause it not to heat. Is this right?


    … and is there an easy way to get the belt back on?

    December 23, 2011 at 8:11 am #366027
    don
    Moderator

    Re: Miele T490

    bazza500 wrote:Hi Don.

    Thanks for the carbons number. The number 9 is not on the drawings you have posted but is on the Connect site under the drawing called “components”. Can ytou get the part number from that?

    Thanks, Barrie


    Relay is 4028320


    Don

    December 27, 2011 at 10:10 pm #366028
    bazza500
    Participant

    Re: Miele T490

    bazza500 wrote:Having read a few posts on this forum it would seem that the carbons being worn and jumping off the nut would cause it not to heat. Is this right?


    … and is there an easy way to get the belt back on?

    Anyone know the answers to these questions?

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.