Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Elba PX906 S/N 10209 dual fuel range cooker
- This topic has 13 replies, 2 voices, and was last updated 14 years, 3 months ago by
rocker.
-
AuthorPosts
-
December 23, 2011 at 3:44 pm #67048
rocker
ParticipantI am fitted a new selector switch…but having a problem rewiring this switch…removed all the orginal wiring.. and rewiring from a diagram sent to me by connect..
the diagram Ref Number 1131378..but there are a couple of cables left over that are not shown on diagram. so feel this may be the wrong diagram sent !!..can any one offer any help please !!!
johnDecember 23, 2011 at 3:51 pm #366075BobHope
ParticipantRe: Elba PX906 S/N 10209 dual fuel range cooker
have you got the correct switch ?.
does the appliance have a digital clock or a mechanical timer.
Bob.
December 23, 2011 at 5:38 pm #366076rocker
ParticipantRe: Elba PX906 S/N 10209 dual fuel range cooker
Bob, mine has a digital clock!!. on the diagram shows the rotisserie switch close to the clock, but on mine the rotisserie is far away and opposite side of clock !!
johnDecember 23, 2011 at 5:41 pm #366077BobHope
ParticipantRe: Elba PX906 S/N 10209 dual fuel range cooker
is it a multi function oven with top, bottom and fan element with a cooling fan, sorry for all the questions
Bob
December 23, 2011 at 5:45 pm #366078rocker
ParticipantRe: Elba PX906 S/N 10209 dual fuel range cooker
yes that is correct, (dont worry ask any questions you want glad of your help).
JohnDecember 23, 2011 at 5:49 pm #366079BobHope
ParticipantRe: Elba PX906 S/N 10209 dual fuel range cooker
if you have part no. 1131378 i think it is the wrong one, i think that should be 1131114S.
6 gas burner, single door electronic 6 button clock lefthand side, rotisserie switch far righthand side.
Bob.
December 23, 2011 at 5:52 pm #366080rocker
ParticipantRe: Elba PX906 S/N 10209 dual fuel range cooker
Bob, it is a muli function oven, not sure about the cooling fan, dont remember seeing one, but could be wrong!!
eveything you say is correct, except the clock has only three buttons.
John
December 23, 2011 at 5:57 pm #366081BobHope
ParticipantRe: Elba PX906 S/N 10209 dual fuel range cooker
only three buttons on the outside but 6 on the timer the rest are hidden, i have a diagram for the 1131114S but not the part no. you have, if you want to give me an email address i will see if it will scan and i will forward it, you might be able to make the loom up out of what you have.
bob.
December 23, 2011 at 5:59 pm #366082BobHope
ParticipantRe: Elba PX906 S/N 10209 dual fuel range cooker
you are right it does not have a cooling fan as its not on this diagram.
Bob.
December 23, 2011 at 6:02 pm #366083rocker
ParticipantRe: Elba PX906 S/N 10209 dual fuel range cooker
Bob, Please sent diagram sure that will help me.
many thanks for your help with this.
JohnDecember 23, 2011 at 6:15 pm #366084BobHope
ParticipantRe: Elba PX906 S/N 10209 dual fuel range cooker
email on its way.
Bob.
December 23, 2011 at 6:43 pm #366085rocker
ParticipantRe: Elba PX906 S/N 10209 dual fuel range cooker
Bob, received diagram thanks, sorry to keep on, but on my one, the negitive that has a direct feed to the clock, has a
spade connector fitted in line,that feeds someting else, which I presume must go to selector !! as there is no other place to connect to..but not shown on diagram !!
johnDecember 23, 2011 at 9:26 pm #366086BobHope
ParticipantRe: Elba PX906 S/N 10209 dual fuel range cooker
dont know what loom you have but there is a double connecter on the diagram i sent you, it comes from the mains terminal block to the thermostat then to the clock then to the oven fan motor and then off to the oven light.
Bob.
December 24, 2011 at 11:04 am #366087rocker
ParticipantRe: Elba PX906 S/N 10209 dual fuel range cooker
Bob, thanks for reply I am a bit lost myself with this one. re- the diagram / the neg grey cable that feeds the clock, there is a spade connector about 4 inches from clock..(appears to fit to selector) but can see that on diagram
john. -
AuthorPosts
- You must be logged in to reply to this topic.
