hotpoint wf boards flashing

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint wf boards flashing

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 14, 2012 at 9:07 pm #67372
    simonb
    Participant

    hi gang hope everyones ok, been reading some tips on circuit board repairs and i quote jim:

    in most cases the largest of the three adjacent capacitors on the main board rated 680u – 10v …. has failed.

    not sure which these are? any futher info? sat looking at componant side with multiplugs on right hand side, and edge connectors to top, microchips on right?

    ok i have a few boards at moment with a bit of time on my hands both boards have burnt resistors on with colour code
    red red yellow gold, if my eyes are serving me right a 22k?

    anyone had success swapping componants on these boards?

    any advice help much appriciated

    simonb

    January 14, 2012 at 9:29 pm #367244
    simonb
    Participant

    Re: hotpoint wf boards flashing

    update found c17 cap, 680uf — theres A C20 AND A C16 will take a closer look.

    January 14, 2012 at 10:30 pm #367245
    iadom
    Moderator

    Re: hotpoint wf boards flashing

    There is a little bunch of three capacitors, its the largest of those. I have done loads of them with 99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} success rate. 🙂

    January 14, 2012 at 11:02 pm #367246
    simonb
    Participant

    Re: hotpoint wf boards flashing

    😀 hey that sounds great, glasses on soldering iron hot ready to go

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.