hotpoint wf boards flashing

[simonb]

hi gang hope everyones ok, been reading some tips on circuit board repairs and i quote jim:

in most cases the largest of the three adjacent capacitors on the main board rated 680u – 10v …. has failed.

not sure which these are? any futher info? sat looking at componant side with multiplugs on right hand side, and edge connectors to top, microchips on right?

ok i have a few boards at moment with a bit of time on my hands both boards have burnt resistors on with colour code
red red yellow gold, if my eyes are serving me right a 22k?

anyone had success swapping componants on these boards?

any advice help much appriciated

simonb

[simonb]

Re: hotpoint wf boards flashing

update found c17 cap, 680uf — theres A C20 AND A C16 will take a closer look.

[iadom]

Re: hotpoint wf boards flashing

There is a little bunch of three capacitors, its the largest of those. I have done loads of them with 99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} success rate. 🙂

[simonb]

Re: hotpoint wf boards flashing

😀 hey that sounds great, glasses on soldering iron hot ready to go

[Author]

Posts