Hotpoint AQCF852BIUK F14

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint AQCF852BIUK F14

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 21, 2012 at 12:29 pm #67494
    allan73
    Participant

    I’ve changed an open circuit heater on this aqualtis dryer but F14 reappeared when I opened the door to check the heat.
    Can somebody advise if there is a reset method to clear a fault code on these ?

    Allan.

    January 21, 2012 at 2:55 pm #367581
    BobHope
    Participant

    Re: Hotpoint AQCF852BIUK F14

    there is not a fault code reset on these, have you fitted the correct heater, production code and seriel number required to identifiy the correct heater.

    Bob.

    January 21, 2012 at 4:32 pm #367582
    allan73
    Participant

    Re: Hotpoint AQCF852BIUK F14

    Mmmm…I’m sure I gave the girl at the spares counter all the numbers, I’ll check on monday though.
    Funny, it ran ok until i opened the door.I found a post on another site by a member of the public, who had changed the heater on the same m/c and had the same problem. He did’nt state if he solved it though.

    Allan.

    February 15, 2012 at 10:10 am #367583
    allan73
    Participant

    Re: Hotpoint AQCF852BIUK F14

    Is there anyone who can help me out on this ?
    We’ve double checked with hotpoint on this and they state this is the correct heater, pt no c00258678. This m/c is still bringing up f14 however, the serial no is 905144150. Is this likely to need a module as there seems to be no reset for this ?

    Grateful for any help,

    Allan.

    February 16, 2012 at 7:12 am #367584
    allan73
    Participant

    Re: Hotpoint AQCF852BIUK F14

    Has anyone got a service manual for this ?

    Allan.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.